Simple Methods

The analytical methods of WineLab are simpler as compared to the official ones. Tests can be performed in a few simple steps:

1. Select the parameter to measure from the menu: the system automatically selects the correct wavelength
2. Use the supplied pipette to add the correct volume of sample to the reagent contained in the cuvette.
3. Follow the displayed instructions.
4. The result is automatically calculated in a few minutes, displayed and printed by means of the on-board printer.

There is no need to clean containers or other accessories or the traditional “glassware”. It is also possible to run a single test without performing the start-up procedure.
The system eliminates the need of having a dedicated laboratory.

The only requirements to run a test are a resting surface and an electrical socket. Tests can be performed in any location without any risk of soiling.

No Technical Support and Maintenance Expenses

• The system is supplied pre-calibrated and does not require complex and regular calibration procedures. The system has been calibrated on the basis of comparative tests carried out using official methods on hundreds of samples.
• The system does not require costly spare parts: the analyser uses LED luminous sources and does not therefore require the maintenance that is usually needed for photometers with tungsten luminous filaments.

Sensitive and Accurate Measuring System

WineLab has been validated by ISVEA, a laboratory certified by ACCREDIA.