Determination of Ammonia in Silage and Animal Feed
The determination of ammonia in animal feed is a parameter of major importance, as it provides essential information on protein quality, preservation status, and feed safety. This aspect is particularly relevant in moist feeds, silages, and fermented feeds. Ammonia is mainly formed as a result of protein and amino acid degradation processes, caused by the activity of undesirable microorganisms or by suboptimal storage conditions. A high ammonia content is therefore indicative of advanced proteolysis and signals abnormal fermentation or feed deterioration. This leads to a reduction in nutritional value, as protein nitrogen is converted into forms that are less available to the animal.
Method
Test type: End Point.
Testing time: 8 minutes.
Analysis sessions with multiple samples are possible up to a maximum of 16 tests for CDR FoodLab® and 3 tests for CDR FoodLab® Junior.
...
Sample treatment
Weigh 10 g of sample and transfer it into a Stomacher filter bag. Add 100 mL of distilled water and mix in the Stomacher for at least 3 minutes. Filter using a filtration kit if necessary (code 300210). Collect a few milliliters of the filtrate and allow it to settle in a test tube for a few minutes. Take 50 µL of the supernatant for analysis. Opalescence does not interfere with the reaction.
Principle of the test
The ammonium ions react with a phenolic derivative and form a blue-green colored complex whose intensity, measured at 700 nm, is directly proportional to the concentration of ammonia in the sample.
...
Calibration curve
The calibration curve of the CDR FoodLab® system confirmed excellent linearity across the entire measurement range.
...
Reagent test Kits
Measuring range
| Analyses | Measuring range | Resolution | Repeatability |
|---|---|---|---|
| NH3 silage | 10 - 600 ppm | 1 ppm | 7 ppm |
The analyzers for oils and fats quality control
CDR FoodLab®
Complete analysis panel, supplied already configured
Up to 16 determinations simultaneously
Possibility of carrying out analyses of the same sample
Integrated printer
Full connections (LAN - USB - Bluetooth barcode/QR code reader)
CDR FoodLab® Jr
Partial analysis panel, customisable configuration
Up to 3 determinations simultaneously
Wireless connection to external printer
USB connections
