How to know the oxidation state to predict the Shelf life of the fried snacks
Snack foods products can undergo degradation processes, first of all, the lipid oxidation which causes rancidity and off-flavours. There are several methods to test the shelf life of snacks and bakery foods.
Check out what are the differences among the methods, download all paper: “Fried snacks: the knowledge of the oxidation state to improve the Shelf life“, written by Dr. Emanuela Pascale, Research fellow at Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze.
Snack foods are currently consumed by millions of people of diverse cultural backgrounds in many countries because they are tempting snacks if characterized by crispness, brilliant colour and flavours.
Snack foods can undergo degradation processes, first of all, the lipid oxidation which causes rancidity and off- flavours.
Thanks to periodic analyses, oxidation status test of nuts, bakery products and snack foods checks the nature and the degradation process’s speed.
The most important indexes that allow to estimate oxidative stability of finished products are:
- Free Fatty Acids (FFA) to determine the process of acidification of fatty component,
- Peroxide Value (PV) to indicate the degree of primary oxidation
- p-Anisidine value (AnV) to evaluate the formation of molecules (aldehydes and ketones) responsible for the organoleptic alterations.
Furthermore, FFA, PV and AnV analysis on oil are indicator of excessive oil deterioration in deep frying process.
Overview of oxidative stability determination methods and shelf life prediction
Several methods are used to predict the resistance of oil to oxidation, in order to be
able to estimate the shelf life of snacks and bakery foods.
The technique founded on a forced oxidation reaction does not provide an actual knowledge of the original oxidative status of the sample, because it only causes an oxidative degradation. For this reason, it can be defined an
indirect method, even if analyses are carried out on finished snack products.
Solvent extraction techniques are commonly used for the determination of lipidic content, using a Soxhlet extractor. Meshing the sample using a mortar until it becomes as homogeneous as possible and choosing an appropriate solvent, it is possible to extract the target analytes and to quantify them by gas-chromatography-mass spectrometry.
Solvent extraction with a Soxhlet continues to be used as a reference method by the AOAC (Association of Official Analytical Chemists) for quality control, although it is cumbersome and at the same time toxic, because hazardous solvents for health are used.
In fact, extraction and post-extraction steps must be performed in a vented hood and it requires skilled personnel, competent in chemical matters.
Furthermore, Soxhlet method needs a b, also about the extraction based on focused microwave-assisted Soxhlet extraction (FMASE). You have a drastic reduction in the extraction time (60 and 35 min versus 16 and 8 h). Nevertheless, a time too long compared to the analysis time obtained using CDR FoodLab®.
Why to use CDR FoodLab®?
Unlike the Soxhlet method, which is restricted to performing one analysis at a time, CDR FoodLab® carries out several analyses at the same time on the same sample, using a smaller amount of it avoiding the needs of solvent extraction techniques and skilled staff.
CDR FoodLab® for frying industry
CDR FoodLab® system is intensively using for the quality control in frying industry since many years.
Free Fatty acids, Peroxides Values and p-Anisidine are among the most important analyses for this sector. Thanks to its easiness, CDR FoodLab® is used from the quality control of the oil to the entire frying process in order to manage it at best avoiding dangerous off-flavours.
With the possibility of Shelf life determination CDR FoodLab® becomes an important system that allows the frying industries to realise a complete quality control from the oil to the packaged final product.
CDR FoodLab® is the only one, not only to be a green method, but also, it is able to give an actual measurement of oxidative stability of finished products, in a simple and fast way.
Snack foods products can undergo degradation processes, first of all, the lipid oxidation which causes rancidity and off-flavours.
There are several methods to test the shelf life of snacks and bakery foods, but CDR FoodLab® is the only one to be a green method. Furthermore it is able to give an actual measurement of oxidative stability of finished products, in a simple and fast way.
CDR FoodLab® is the analysis system specifically developed by CDR to respond to the needs of snacks producers of any size.
CDR FoodLab® allows testing the shelf life of finished products (fried snacks and nuts) more rapidly and easily than traditional methods with a green method.
In order to have more info about the comparison between different methods download all paper: “Fried snacks: the knowledge of the oxidation state to improve the Shelf life“, written by Dr. Emanuela Pascale, Research fellow at Department of Chemistry “Ugo Schiff”, Università degli Studi di Firenze.